Request for Quotation - Bulk Material

Name :
Designation :
Company:
Address :
City :
State :
Pin Code :
Country :
Phone No. :
Fax No :
Email :
Website :
   
Material Handled :
Material Characteristics :  
Particle Size : mesh mm
   
Sieve Analysis (%) :
Mesh 25 40 60 100 200 400
Micron 710 425 250 150 75 38
%
   
   
Moisture Content (%) : (surface) :
Compressibility Factor(%):
Material Temperature (°C):
Angle of (°) : Repose Slide
Bulk Desity (Kg / m³) : Loose Packed Dynamic
Hours Run : Per Day Per Week
Duty Rating : Continuous Intermittent
Capacity Required : Average (m³/hr) Maximum (m³/hr)
Feeding From :
Discharge To :
Number of : Inlet Outlet
Orientation :
Approx. Overall Length (mtr) :
Material Classification
Size Material Characteristic Class  
Very fine - 100 mesh and under A
Fine-1/8 inch mesh and under B
Granular - 1/2 inch and under C
Lumpy-containing lumps over 1/2 inch D
Irregular - being fibrous, stringy, or the like H
 
Flowability Very free flowing - angle or repose up to 30° 1
Free flowing - angle or repose 30° to 45° 2
Sluggish - angle or repose 45° and up 3
 
Abrasiveness Non Abrasive 6
Midly Abrasive 7
Very abrasive 8
 
Other Characteristics Contaminable, affecting use of saleability K
Hygroscopic L
Highly corrosive N
Midly corrosive P
Gives off dust or fumes harmful to life R
Contains explosive dust S
Degradable, affecting use or saleability T
Very light and fluffy W
Interlocks or mats to resit digging X
Aerates and becomes fluid Y
Packs under pressure Z

Material Class : ( For Example - Charcoal : B37T

Comments : ( Please send dimensioned sketch / drawing seperately ).

 
   

 

 

 

 

 Home | Branches | Products | Demo Facilities | Manufacturing | Services | Catalog Request | Search | Sitemap
 The site is best viewed on IE5 or higher and resolution 1024 X 768 pixels